You are here : Home » Products
Double Dot Interlining
型号 ARTICLE | 粘合条件 | 使用范围及特点 APPLICATION RANGE | 成分COMPOSITION POLYESTER(P) NYLON(N) | 克重 WEIGHT (GSM) | 门幅(CM) WIDTH | 实际温度(℃)WORKING TEMP(℃) | 时间 TIME(sec) | 压力 PRESSURE (Kg/cm2) | 6010 | 100%P | 24 | 90-210 | 120-135 | 10-12 | 1.5-2 | 耐水洗、干洗,适用于轻薄面料。用于领、袖口、裙、门襟等小部位。 Resistant to washing and to dry cleaning,suitable for small area application such as interlining for Collars,cuffs,skirts and front fly used for light fabics. | 7010 | 50%N50%P | 24 | 90-210 | 120-135 | 10-12 | 1.5-2 | 8010 | 80%N20%P | 24 | 90-210 | 120-135 | 10-12 | 1.5-2 | 6020 | 100%P | 25 | 90-210 | 120-135 | 10-12 | 1.5-2 | 7020 | 50%N50%P | 25 | 90-210 | 120-135 | 10-12 | 1.5-2 | 8020 | 80%N20%P | 25 | 90-210 | 120-135 | 10-12 | 1.5-2 | 6030 | 100%P | 28 | 90-210 | 120-135 | 10-12 | 1.5-2 |
耐水洗、干洗,适用于薄、中型面料。用于小部位及大身。 Resistant to washing and dry cleaning,suitable for large and small area application for a wide range of light and thick fabrics. | 7030 | 50%N50%P | 28 | 90-210 | 120-135 | 10-12 | 1.5-2 | 8030 | 80%N20%P | 28 | 90-210 | 120-135 | 10-12 | 1.5-2 | 6040 | 100%P | 34 | 90-210 | 125-135 | 12-13 | 2-2.5 | 7040 | 50%N50%P | 34 | 90-210 | 125-135 | 12-13 | 2-2.5 | 8040 | 80%N20%P | 34 | 90-210 | 125-135 | 12-13 | 2-2.5 | 6050 | 100%P | 41 | 90-210 | 130-140 | 13-15 | 2-2.5 | 耐水洗、干洗,适用于厚型面料,秋冬装的大身等。 Resistant to washing and to dry cleaning suitable for large area application for thick fabrics used for autumn and winter clothing. | 7050 | 50%N50%P | 41 | 90-210 | 130-140 | 13-15 | 2-2.5 | 8050 | 80%N20%P | 41 | 90-210 | 130-140 | 13-15 | 2-2.5 | 6060 | 100%P | 47 | 90-210 | 130-140 | 13-15 | 2-2.5 | 7060 | 50%N50%P | 47 | 90-210 | 130-140 | 13-15 | 2-2.5 | 8060 | 80%N20%P | 47 | 90-210 | 130-140 | 13-15 | 2-2.45 | 6070 | 100%P | 52 | 90-210 | 130-145 | 13-15 | 2-2.5 | 7070 | 50%N50%P | 52 | 90-210 | 130-145 | 13-15 | 2-2.5 | 8070 | 80%N20%P | 52 | 90-210 | 130-145 | 13-15 | 2-2.5 |
|
|
|
|
|
|
|
|
Service: Manufacturers are reminded that the above fusing conditions are intended as a guide only. Preliminary trail is recommended before fusing new material in production.
|